HIKVISION C30 Series - Configure Signal Source; Video Parameters

Video Wall Controller • User Manual
14
Parameter Item
Parameter Name
Meaning
Background Color
The default color is red. It is
adjustable.
Font Direction
Horizontal or vertical. Multiple
virtual LED frames can only apply the
same font direction, which cannot
be mixed.
Alignment
Align Left, Center, or Right.
Action Settings
Moving Mode
normal or static.
Moving Direction
Only supports Left<-Right.
Moving Speed
The moving speed of content in the
virtual LED frame.
Click OK. Then drag the virtual LED to the Video Wall with output signal on the right.
Configure Signal Source
Introduces the configuration of signal source.
It is used to configure video parameters of the signal source. Save after setting.
Enter Configuration → Signal Source Configuration → Video Parameter. Select a signal source, adjust
ICR mode and brightness. The color mode supports bright, standard, and soft custom. After selecting
Custom, click Restore Default Settings to restore the video parameter values to the default values.
Video Parameters