Need help?Do you have a question about the HIKVISION DS-C30S-S23 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Rack capacity | 8U |
| Built-in display | Yes |
| Housing material | Metal |
| Input voltage | 100 - 240 V |
| Input frequency | 50/60 Hz |
| Power consumption (max) | 1000 W |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| RJ-45 ports quantity | 2 |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 447 mm |
|---|---|
| Width | 442 mm |
| Height | 354.8 mm |
Provides instructions for using and managing the Product, for description and explanation only.
Outlines Hikvision's ownership of copyrights and trademarks related to the products.
States limitations of liability, warranties, and user responsibilities for product use.
Specifies the product series this manual is applicable to (C30S series video wall controller).
Lists default device parameters like login username and IP address.
Defines the meaning of symbols used throughout the document (Note, Caution, Danger).
Highlights mandatory compliance with electrical safety regulations and best practices for device usage.
Provides important notes regarding surge protectors, USB port current limits, and serial port usage.
Provides a high-level overview of the DS-C30S series video wall controller.
Outlines the sequential steps for initial setup and configuration of the device.
Details the process of activating the device using the SADP software.
Explains how to activate the device through a web browser interface.
Describes the procedure for logging into the device's web interface.
Guides on setting up the device's IPv4 address, subnet mask, and gateway.
Covers the initial setup of the video wall, including scale and output port binding.
Details various operations for managing video walls, windows, and scenes.
Guides on adjusting image parameters, splicing sources, and other display settings.
Covers device-level configurations including system parameters, HTTP(S), and events.
Covers system maintenance tasks like restarting, upgrading, and backing up device parameters.
Details security management, including IP address filtering, SADP, and Syslog configuration.
Instructions for enabling SSH, exporting logs, and debugging the device.
Guides on upgrading LED receiving card firmware and configuration.
To Next Page
