HIKVISION C30 Series User Manual

Video Wall Controller • User Manual
33
 Click Video Parameter, select a signal source and color mode, and adjust the brightness.
Set Video Parameters
If you select Custom as the color mode and select Simple Restore in the Backup and Reset page,
the video parameters will be restored to the default settings.
 Click Image Tuning, select a signal source, set the tuning unit, and adjust the position.
Set Image Tuning
Only VGA signal sources support image tuning.
 Click Signal Source Clipping, select a signal source, and set the clipping value at top, bottom,
left, and right edges.

HIKVISION C30 Series Specifications

General

Brand	HIKVISION
Model	C30 Series
Category	Controller
Language	English