To Previous Page

Select the !L!RM MODE as SOLID; In this way, the white

light source turns on, when the PIR module received the

alarm signal;

In the TIME SETTING you can set the time as 5 s, 10 s, 15

s, 30 s, or 60 s, which means that the solid mode stays for

the set time when the camera received one alarm signal;

Note:

The solid mode will be stayed for another set time when

second alarm signal is received, and the rest can be done

in the same way;

 FL!SHING

Select the !L!RM MODE as FL!SHING; In this way, the

white light source flashes when the PIR module received

the alarm signal;

OFF

Select OFF to give up this function;

3.6.2 PIR LEVEL

!djust the sensitivity of the PIR module, and the greater

the value is, the more sensitive the PIR module is;

3.7 FACTORY DEFAULT

Reset all the settings to the factory default;

3.8 EXIT

Move the cursor to EXIT and click Iris+ to exit the menu;

3.9 SAVE & EXIT

Move the cursor to S!VE & EXIT and click Iris+ to save the

settings, and exit the menu;

UD10294B

Available from A1 Security Cameras

HIKVISION D0T PIR Series User Manual

Questions and Answers: