Need help?Do you have a question about the HIKVISION DS-2CD2632F-I(S) and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| IR Range | Up to 30 m |
| Weatherproof Rating | IP66 |
| Shutter Speed | 1/3 s to 1/100, 000 s |
| Lens Mount | M12 |
| Day & Night | IR cut filter with auto switch |
| Wide Dynamic Range | Digital WDR |
| Digital Noise Reduction | 3D DNR |
| System Compatibility | ONVIF, PSIA, CGI |
| Ingress Protection | IP66 |
| Lens | 2.8 mm / 4 mm / 6 mm |
| Video Compression | H.264 / MJPEG |
| Power Supply | 12 V DC / PoE |
| Bit Rate | 32 Kbps to 8 Mbps |
| Frame Rate | 25fps (1920 × 1080) |
| Image Settings | Brightness, contrast, saturation, sharpness |
| Network Storage | NAS |
| Alarm Trigger | Motion detection |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP |
| Security | User Authentication, Watermark |
| Communication Interface | RJ45 10/100 Mbps Ethernet |
| Operating Conditions | -30 °C to +60 °C, Humidity 95% or less |
| Power Consumption | Max. 7.5 W |
| Max Resolution | 2048 × 1536 |
To Next Page