Slide the sun shield according to the arrow direction as shown in Figure
2-3(left).
Rotate the TW M3X5 screw clockwise to tighten the sun shield.
Figure 2-3 Assemble the Camera
Note: For water-proof, please align the rotating label on the front cover with that
on the camera when you rotate the front cover clockwise. Refer to Figure
2-3(right).
Mounting
This camera is equipped with a bracket on the bottom. It can be mounted to a
wall directly and can also be mounted to a wall with a junction box or a gang box.
Wall mounting
Steps:
To Next Page
Loading...
