Note: Device can be searched and displayed in the list in 15 seconds after
it goes online; it will be removed from the list in 45 seconds after it goes
offline.
Search online devices manually:
You can also click to refresh the online device list
manually. The newly searched devices will be added to the list.
Note: You can click or on each column heading to order
the information; you can click to show the device table and
hide the network parameter panel on the right side, or click to
show the network parameter panel.
Modify device information
Steps:
1). Select the device to be modified in the device list as shown in Figure
3-3. The network parameters of the device will be displayed in the
Modify Network Parameters panel on the right side as shown in Figure
3-4.
2). Edit the modifiable network parameters, e.g. IP address and port
number.
To Next Page
Loading...
