User Manual of HD-TVI Speed Dome
© Hikvision
3.4.4 Configuring Patterns
Purpose:
A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be
recalled by a command or automatically performed by a configured function (alarm, park, time task,
and power-up).
Steps:
1. Move the cursor to enter the PATTERNS submenu:
MAIN MENU > DOME SETTINGS > PATTERNS
PATTERNS
PATTERN NO. 1
RECORD PATTERN
PREVIEW
CLEAR
REMAINING 100
BACK EXIT
Figure 3-15 Pattern Configuration Menu
2. Choose the pattern number.
(1) Move the cursor to PATTERN NO. and click IRIS+ to enter edit mode.
(2) Click the up/down direction buttons to select the number of the pattern which is to be
configured.
(3) Click IRIS+ again to confirm the settings.
Up to 5 patterns can be configured.
3. Edit the pattern.
(1) Move the cursor to RECORD PATTERN and click IRIS+ to enter edit mode.
REMAIN MEMORY 100
IRIS + OK
IRIS - CANCEL
Figure 3-16 Edit the Pattern
(2) Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
To Next Page
Loading...
