Need help?Do you have a question about the HIKVISION DS-2CD4012F-A and is the answer not in the manual?
General| Image Sensor | 1/3" progressive scan CMOS |
|---|---|
| Max Resolution | 1280 × 960 |
| Video Compression | H.264/MJPEG |
| Audio | Two-way audio |
| Ingress Protection | IP66 |
| Wide Dynamic Range | Digital WDR |
| Operating Conditions | Indoor/Outdoor |
| Minimum Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Lens Type | Fixed |
| IP Rating | IP66 |
| Lens | 4 mm |
| Power Supply | 12 VDC ± 25% |
| Frame Rate | 30 fps at 1280 × 960 |
| Angle of View | Horizontal: 89°, Vertical: 46°, Diagonal: 107° |
| Day & Night | ICR |
| Network Storage | NAS (Support NFS, SMB/CIFS) |
| Day/Night | IR cut filter with auto switch |
| Operating Temperature | -30 °C to +60 °C (-22 °F to +140 °F) |
| Power Consumption | Max. 5.5W |
| Weight | 0.5 kg |
Details FCC compliance, rules, and conditions for the device's operation.
Confirms compliance with EU directives for safety and EMC standards.
Explains the distinction between warnings and cautions for user safety and equipment protection.
Important checks and considerations before beginning the installation process.
Provides detailed steps for installing the camera on a ceiling mount.
Provides detailed steps for installing the camera on a wall mount.
Instructions on how to insert and remove the SD card from the camera.
Guides on using SADP software to detect and set the camera's IP address on the LAN.
Steps to edit network parameters like IP address and port using the SADP interface.
Lists the necessary operating system, CPU, RAM, display, and web browser versions.
Steps to log in via web browser and install the required plug-in for viewing.
To Next Page
