Passenger flow in vertical up-and-down direction (right)
2) Passageway width should be within camera’s counting width
3) Avoid obstacles such glass door, shield door and turnstile that block the camera. For
Each divided passageway, mount one camera right above
4) The camera should be mounted as close as possible to the passageway without
obstacle. Remove the obstacle or adjust the camera mounting position if there is
obstacle below the camera. Meanwhile, to prevent miscounting, if there’s sliding door
onsite, make sure the trajectory of sliding door not overlap the detection line.
Otherwise, the counting number may be misled by the door opening and closing
To Next Page
Loading...
Need help?
General
