Figure 3-61 Install the Dome Camera
Note: To uninstall the dome camera, press the lock screw and rotate the mounting base
counterclockwise.
Figure 3-62 Uninstall the Dome Camera
5. Loosen the set screws with a hex key (supplied) to remove the lower dome.
Figure 3-63 Remove the Lower Dome
6. Connect the RCA analog video output with a monitor to view the image of the camera. Loosen
the set screw and adjust the panning position and tilting position until get the desired
surveillance angle. Loosen the zoom puller and focus puller and adjust the lens focus to obtain
a perfect image.
To Next Page
Loading...
