Need help?Do you have a question about the HIKVISION DS-2CD852MF-E and is the answer not in the manual?
General| Model | DS-2CD852MF-E |
|---|---|
| Sensor Type | CMOS |
| Signal System | PAL/NTSC |
| Lens Type | Fixed |
| Field of View | 73.1°(4mm), 46°(6mm), 36.5°(8mm), 23°(12mm) |
| Lens Mount | M12 |
| S/N Ratio | >62dB |
| IR Range | Up to 30m |
| IR Distance | 30m |
| Video Compression | H.264 |
| Weight | 500g |
| Category | IP Camera |
| Minimum Illumination | 0 Lux with IR |
| Shutter time | 1/100, 000 s |
| Day & Night | IR cut filter with auto switch |
| Synchronization | Internal |
| Video Frame Rate | 50Hz: 25fps(1280 × 960), 25fps (1280 × 720), 25fps(704 × 576) 60Hz: 30fps(1280 × 960), 30fps (1280 × 720), 30fps(704 × 480) |
| Video Output | 1Vp-p Composite Output(75 Ω/BNC) |
| Frame Rate | 50 Hz: 25 fps (1280 × 960), 25 fps (1280 × 720), 25 fps (704 × 576) 60 Hz: 30 fps (1280 × 960), 30 fps (1280 × 720), 30 fps (704 × 480) |
| Network Interface | RJ45 10 M/100 M self-adaptive Ethernet interface |
| Power Supply | 12 VDC ± 10% |
| Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F) |
| Operating Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
Details the interface ports and connectors for various Box Camera models (I, II, and III).
Details the interface ports and connectors for various Dome Camera models (I, II, and III).
Details the interface ports and connectors for the Bullet Camera.
Details the interface ports and connectors for the Cube Camera.
Details the interface ports and connectors for the Mini Dome Camera.
Introduces the SADP software, a tool for network device discovery and IP configuration.
Explains how to search for active network devices and modify their IP addresses using SADP.
Provides steps to reset device passwords using a serial code through the SADP software.
To Next Page
