HIKVISION ds-2cd8153f-e - Page 78

Installation Manual of Network Camera
71
1
1
1
1
2
2
2
2
1:Screw Hole
for Bracket
2:Screw Hole
for Mounting
Base
Cable Hole
Screw Hole
Figure 4-29 Drilling Holes in the Wall
3. If you need to route cables through the wall (or ceiling), cut a cable hole according to the
drill template. Skip this step, if you want to route the cables on the surface of the ceiling.
4. Route the cables of the camera.
5. Secure the camera to the wall (or ceiling) with expansion screws. Refer to the Figure 4-30.