HIKVISION DS-2CE12D0T-PIRXF User Manual

WHITE BALANCE
White balance, the white rendition function of the
camera, is to adjust the color temperature according to
the environment. It can remove unrealistic color casts in
the image. You can set WHITE BALANCE mode to AUTO,
or MANUAL.
 AUTO
Under AUTO mode, white balance is being adjusted
automatically according to the color temperature of the
scene illumination.
 MANUAL
You can set the R-GAIN/B-GAIN value to adjust the
shades of red/blue color of the image.
WHITE BALANCE
MODE
R-GAIN
B-GAIN
BACK
EXIT
SAVE&EXIT
MANUAL
110
110



Figure 3-6 MWB MODE
BRIGHTNESS
Brightness refers to the brightness of the image. You
can set the brightness value from 1 to 9 to darken or
brighten the image. The greater the value is, the
brighter the image is.
CONTRAST
This feature enhances the difference in color and light
between parts of an image.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce.
SATURATION
Saturation is the proportion of pure chromatic color in
the total color sensation. Adjust this feature to change
the saturation of the color.
DNR
DNR refers to digital noise reduction. This function
reduces noise in video stream.
MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.5 FUNCTIONS
3.5.1 PIR LEVEL
Adjust the sensitivity of the PIR module. The higher the
value is, the more sensitive the PIR module is.
Note:
This function is only showed when you switch the video
output to TVI mode.
3.5.2 PIR DET MODE
You can set the PIR DET MODE to INDOOR or
OUTDOOR to meet your needs.
Note:

HIKVISION DS-2CE12D0T-PIRXF Specifications

General

Brand	HIKVISION
Model	DS-2CE12D0T-PIRXF
Category	Security Camera
Language	English