To Next PageTo Next Page
Need help?Do you have a question about the HIKVISION DS-2CE71D0T-PIRLO and is the answer not in the manual?
General| Image Sensor | 2 MP CMOS |
|---|---|
| Signal System | PAL/NTSC |
| Lens Mount | M12 |
| Day & Night | ICR |
| WDR (Wide Dynamic Range) | Digital WDR |
| Minimum Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| IR Range | Up to 30m |
| PIR Detection Angle | 110° |
| PIR Detection | Yes |
| Power Supply | 12 VDC ± 25% |
| Ingress Protection | IP67 |
| Material | Plastic |
| Resolution | 1920 × 1080 |
| Lens | 2.8mm/3.6mm/6mm |
| Video Frame Rate | 25/30fps (PAL/NTSC) |
| Operating Conditions | Indoor |
| Operating Temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Protection Level | IP67 |
| Weight | 450g |
Lists crucial safeguards to prevent serious injury or death if neglected.
Lists precautions to prevent potential injury or material damage if neglected.
Details the process for mounting the camera on ceilings or walls without a junction box.
Explains how to mount the camera using an optional inclined ceiling mount.
Guides the installation process when using a junction box.
Provides instructions for mounting the camera on a wall using a separate wall mount.
Allows selection of video formats like 2MP, 4MP, 5MP.
Covers exposure settings like EXPOSURE MODE, AGC, and SLOW SHUTTER.
Covers DAY/NIGHT settings including COLOR, B/W, IR LIGHT, and SMART IR.
Controls sensitivity for switching between day and night modes.
