Manual White Balance:
In MWB mode, you can adjust the color temperature manually to meet your own demand as
shown in Figure 6-32.
Figure 6-32 Manual White Balance
Outdoor
You can select this mode when the speed dome is installed in outdoor environment.
Indoor
You can select this mode when the speed dome is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the speed dome.
Sodium Lamp
You can select this mode when there are sodium lamps installed near the speed dome.
Auto-Tracking
In Auto-Tracking mode, white balance is continuously being adjusted in real-time according to
the color temperature of the scene illumination.
Image Enhancement
3D Digital Noise Reduction
You can set Digital Noise Reduction function to Normal and adjust the Noise Reduction Level as
shown in Figure 6-33. The level ranges from 0 to 100.
Figure 6-33 3D Digital Noise Reduction
If you are a professional technician, you can set it to Expert Mode then adjust Space DNR Level
and Time DNR Level. The level ranges from 0 to 100.
Figure 6-34 Expert Mode
Defog Mode
You can set the Defog Mode to ON or OFF as you need.
To Next Page
Loading...
Need help?
General
