User Manual of Network Mini PTZ Camera
© Hikvision
Figure 11-7 Device Information
11.7 Maintenance
11.7.4 Rebooting the PTZ camera
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click to reboot the network PTZ camera.
Figure 11-8 Reboot the Device
11.7.5 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click or to restore the default settings.
To Next Page
Loading...
