User Manual of Network Mini PTZ Camera
© Hikvision
Figure 8-6 Setting Quota
8.3 Configuring Recording Schedule
Before you start:
Please make sure a local storage card is inserted in the PTZ camera or the network
storage is added to the PTZ camera, and is initialized.
Purpose:
There are two kinds of recording for the PTZ camera: manual recording and
scheduled recording. For the manual recording, refer to Section 5.4 Recording and
Capturing Pictures Manually. In this section, you can follow the instructions to
configure the scheduled recording. By default, the record files of scheduled recording
are stored in the SD card (if supported) or in the network disk.
Steps:
1. Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
To Next Page
Loading...
