User Manual of Network Mini PTZ Camera
© Hikvision
(3) Set the date of the DST period.
(4) Click to save the settings.
Figure 7-6 DST Settings
7.3 Configuring Network Settings
7.3.1 Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the PTZ camera over
network. IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
2. Select the NIC you want to configure, LAN and WLAN are selectable.
To Next Page
Loading...
