User Manual of Network Mini PTZ Camera
© Hikvision
Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click to set the system time from the pop-up calendar.
(3) Click to save the settings.
You can also check the Sync. with computer time checkbox to synchronize
the time of the PTZ camera with the time of your computer.
Figure 7-4 Time Sync Manually
Select the Time Zone
Purpose:
When the PTZ camera is taken to another time zone, you can use the Time Zone
function to adjust the time. The time will be adjusted according to the original
time and the time difference between the two time zones.
From the Time Zone drop-down menu as shown in Figure 7-5, select the Time
Zone in which the PTZ camera locates.
Figure 7-5 Time Zone Settings
Configuring Daylight Saving Time (summer time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time
period of a year, you can turn this function on. The time will be adjusted
automatically when the Daylight Saving Time(DST) comes.
Steps:
(1) Enter the DST interface by Configuration > Advanced Configuration >
System > DST
(2) Check to enable the DST function.
To Next Page
Loading...
Need help?
General
