User Manual of Network Mini PTZ Camera
© Hikvision
Figure 5-4 Setting a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
Pan the PTZ camera to the right or left.
Tilt the PTZ camera up or down.
Zoom in or out.
Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
You can configure up to 300 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Figure 5-5 Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset
you want.
Steps:
1. Select any preset from the list.