User Manual of Network Mini PTZ Camera
© Hikvision
detected object get marked with rectangle in the live view.
3. Select the configuration mode as Normal or Expert and set the corresponding
motion detection parameters.
Normal
Figure 7-38 Motion Detection Settings-Normal
Steps:
(1) Click . Click and drag the mouse on the live video image to draw a
motion detection area.
(2) Click to finish drawing.
• You can draw up to 8 motion detection areas on the same image.
• You can click to clear all of the areas.
(3) Move the slider to set the sensitivity of the
detection.
Expert
To Next Page
Loading...
