User Manual of Network Mini PTZ Camera
© Hikvision
The Pre-record and Post-record parameters vary depending on the PTZ
camera model.
Overwrite: If you enable this function and the HDD is full, the new record
files overwrite the oldest record files automatically.
Recording Stream: You can select the stream type for recording; Main stream
and Sub Stream are selectable. If you select the sub stream, you can record
for a longer time with the same storage capacity.
4. Click to edit the record schedule.
Figure 8-9 Record Schedule
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
If you want to configure the all-day recording, please check the All Day
checkbox.
If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
The time of each segment cannot be overlapped. Up to 8 segments can
be configured for each day.
(2) Select a Record Type. The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, Face Detection, Intrusion Detection,
Line Crossing Detection, Audio Exception Detection and All events.
Continuous
If you select Continuous, the video will be recorded automatically according
to the time of the schedule.
Record Triggered by Motion Detection
To Next Page
Loading...
Need help?
General
