White Balance
The White Balance mode can be set to Auto, MWB, Outdoor, Indoor, Fluorescent
Lamp, Sodium Lamp and Auto-Track.
Auto:
In Auto mode, the camera retains color balance automatically according to the
current color temperature.
Manual White Balance:
In MWB mode, you can adjust the color temperature manually to meet your own
demand as shown in Figure 6-34.
Figure 6-34 Manual White Balance
Outdoor
You can select this mode when the speed dome is installed in outdoor environment.
Indoor
You can select this mode when the speed dome is installed in indoor environment.
Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the speed
dome.
Sodium Lamp
You can select this mode when there are sodium lamps installed near the speed
dome.
Auto-Track
In Auto-Track mode, white balance is continuously being adjusted in real-time
according to the color temperature of the scene illumination.
Note: This function varies depending on the models of speed dome.
Image Enhancement
3D Digital Noise Reduction
You can enable or disable the 3D Digital Noise Reduction function as shown in Figure
6-35. The level ranges from 0 to 100.
Figure 6-35 3D Digital Noise Reduction
This function varies depending on the models of speed dome.
To Next Page
Loading...
Need help?
General
