Chapter 6 VCA Configuration
Before you start:
Go to Configuration > System > Maintenance > VCA Resource Type and select the VCA Resource
as Temperature Measurement + Behavior Analysis.
Purpose:
You can do intelligent analysis, such as behavior analysis, with the speed dome. Multiple rules can
be configured for different requirements.
The VCA (Video Content Analysis) function only supported by the thermal channel.
6.1 Configuring VCA Information
Steps:
1. Enter the VCA Information Configuration interface:
Configuration > VCA Configuration > VCA Info.
Figure 6-1 VCA Information
2. Check the checkbox to enable the Intelligent Analysis. And you can view the current version
for the behavior analysis.
3. Set the display information:
If you select to display the target info and rule info on the alarm picture are supported;
you can enable the functions by ticking the corresponding checkbox on your demand.
And if you tick the checkbox of display target info and rule on stream, the information
will be added to the video stream, and the overlay will be displayed if you get live view or
play back by the VS Player.
To Next Page
Loading...
Need help?
General
