once to release the shutter once.
4.7 Network Configuration
Connect your phone to the Wi-Fi or hot spot
of the monocular, you can configure the
parameters and realize functions of the
device.
Wi-Fi
Steps:
1. Hold the button to show the
menu of monocular.
2. Press the key to enable Wi-Fi
function.
3. Setting the Wi-Fi name and password
of your phone or the router as follow:
- Wi-Fi Name: WLAN-IPTP.
- Wi-Fi Password: abcd1234.
4. Search the “IVMS-4500” on App Store
(iOS System) or Google Play
TM
(Android System) to download and
install the app.
5. Open the APP and connect your
phone with the device. You can view
the interface of monocular on your
phone.
Hot Spot
Steps:
1. Hold the button to show the
menu of monocular.
2. Press the key to enable hot spot
function.
3. Turn on the WLAN and connect to the
hot spot.
- Hot Spot Name: HIK-IPTS Serial
No.
- Hot Spot Password: S + serial
No.
4. Search the “IVMS-4500” on App Store
(iOS System) or Google Play
TM
(Android System) to download and
install the app.
5. Open the APP and connect your
phone with the device. You can view
the interface of monocular on your
phone.
4.8 Others
LED Light Supplement
Press the button to enable/disable the
LED light supplement.
Note: the function may not be
supported by some camera models.
To Next Page
Loading...
General