Need help?Do you have a question about the HIKVISION DS-7216HUHI-F2/N and is the answer not in the manual?
General| Two-way Audio | Yes |
|---|---|
| Audio Bit Rate | 64Kbps |
| Dual Stream | Yes |
| Remote Connections | 128 |
| SATA | 2 SATA interfaces |
| HDD Capacity | Up to 10TB per HDD |
| Alarm In/Out | 16/4 |
| Power Supply | 12V DC |
| Working Humidity | 10% ~ 90% |
| Video Input | 16 |
| CVBS Input | Yes |
| Video Output | HDMI, VGA |
| HDMI Output | 1 Channel |
| VGA Output | 1 Channel |
| Audio Output | 1 Channel |
| Video Compression | H.264+ |
| Recording Resolution | 1080p/720p/960H/D1 |
| Audio Compression | G.711u |
| Stream Type | Video/Audio |
| Synchronous Playback | 16-ch |
| Network Protocols | TCP/IP, DHCP, DNS, PPPOE, HTTP, FTP, NTP, UPnP |
| Network Interface | 1 RJ45 10M/100M/1000M self-adaptive Ethernet port |
| USB Interface | 2 USB 2.0 |
| Working Temperature | -10°C ~ +55°C (14°F ~ 131°F) |
Procedures for safely starting up and shutting down the DVR to ensure longevity.
Steps to activate the DVR by setting an initial administrator password for first-time access.
Guide on configuring and using an unlock pattern for device login security.
Walkthrough of initial device setup using the startup wizard for basic configuration.
Procedures for logging into and out of the DVR to access its functions and menus.
Instructions on how to reset the administrator password using a GUID file if forgotten.
Steps to add and connect IP cameras to the DVR for surveillance.
Overview of live view mode, showing real-time video images from cameras.
Description of various functions available in live view mode, such as single/multi-screen display.
Guide on mouse operations for navigation and control within the live view interface.
How to switch between main and auxiliary video outputs for display.
Explanation of the quick setting toolbar icons for immediate access to common functions.
Customizing live view settings like output interface, dwell time, and audio.
Manually diagnosing video quality of analog channels and viewing results.
Procedure to set PTZ parameters before controlling the PTZ camera.
Steps to customize and save PTZ presets, patrol paths, and patterns.
Accessing and using the PTZ control panel for camera movement and adjustments.
Steps to configure encoding parameters for recording streams (main, sub).
Setting up schedules for automatic recording and capture based on time or events.
Setting up motion detection parameters to trigger recording or other actions.
Configuring recording and capture triggered by external alarm inputs.
Setting up recording and capture for various events like motion, VCA, and alarms.
How to manually start/stop recording and capture operations.
Enabling redundant recording to save data on multiple HDDs for safety.
Managing HDDs in groups for organized storage of recorded files.
Protecting recorded files by locking them or setting HDD to read-only mode.
Methods for playing back recorded video files from the DVR.
Quickly playing back recorded video files from the last five minutes for a specific channel.
Searching and playing back record files by selecting channels and dates.
Searching and playing back files based on specific event types like motion or VCA.
Procedures for backing up recorded files to various external devices.
How to configure motion detection parameters, including area and sensitivity.
Setting up handling methods for external sensor alarms and their response actions.
Defining actions to be taken when an alarm or exception occurs, such as notifications and output triggers.
Steps to configure face detection, including rules, sensitivity, and linkage actions.
Configuring vehicle detection for traffic monitoring, license plate capture, and FTP upload.
Setting up a virtual line to detect objects crossing and triggering alarms based on direction.
Configuring intrusion detection for pre-defined virtual regions, including sensitivity and percentage.
Configuration of general network parameters like IP address, gateway, and working modes.
How to configure RAID arrays for disk redundancy and performance.
Steps to enable the RAID function for disk array creation.
Steps to initialize newly installed hard disk drives before use.
Configuring On-Screen Display settings like date, time, and camera name.
Common issues and their solutions for operating the DVR.
To Next Page
