DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 107
10. Click Linkage Action tab to set up alarm response actions of motion alarm (see Chapter 8.7 Setting Alarm
Response Actions).
11. Repeat the above steps to set up arming schedule for other days of the week.
12. Click OK to complete the channel’s motion detection settings.
13. To set motion detection for another channel, repeat the above steps or copy the above settings to it.
You cannot copy the “Trigger Channel” action.
8.2 Setting Sensor Alarms
Set up handling method of an external sensor alarm.
1. Enter Alarm Input Settings interface, Menu > Recording Configuration > Trigger.
Figure 139, Alarm Input Settings Interface
2. Set the handling method of the selected alarm input.
3. Check the Enable checkbox and click Set to set its alarm response actions.
To Next Page
Loading...