DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
50 UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA
Figure 58, PTZ Panel – General
4. Click to enter the preset No. in the corresponding text field.
5. Click Call Preset to call it.
When a UTC camera is connected and the PTZ protocol is set to
UTC, you can call preset 95 to enter the UTC camera menu. Use the
PTZ control panel directional buttons to operate the menu.
4.2.3 Customizing Patrols
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration
before moving on to the next key point. The key points correspond to the presets. The presets can be
set following the steps above in
Customizing Presets
.
1. Enter the PTZ Settings interface, Menu > Camera > PTZ.
To Next Page
Loading...