HIKVISION DS-7332HGHI-SH

1 0 A D D I P C A M E R A S ( c o n t i n u e d )
11 A D D A N A L O G C A M E R A S
 Adding Analog Cameras
1. Connect analog camera(s) to the “Video In” BNC connectors.
 Enabling Analog Cameras
1. Analog cameras are enabled by default; no further action is required.
 Disabling Analog Cameras
1. Go to MENU > CAMERAS > ANALOG (TAB).
2. Analog Camera List will display all enabled cameras.
3. Disable analog cameras in the Analog Cameras Enable Status section:
• Uncheck the camera checkbox of any camera(s) you wish to disable.
• Check the Analog checkbox to disable/enable all analog cameras.
4. Press APPLY to save settings.

TRASH
CAN
Press to delete camera
 +
Press to add camera
EDIT
Press to change IP address (must
be in LAN2 range)
CAMERA LIST (WHITE)
Added cameras 
CAMERA LIST (YELLOW)
Detected cameras 
REFRESH
Press to find network cameras 
NOTE: To change camera
name, go to OSD.





