HIKVISION DS-7332HQHI-K4 Quick Start Guide

Digital Video Recorder Quick Start Guide
7
Chapter 3 Menu Operation
3.1 Startup
Proper startup is crucial to expanding the life of the DVR.
Step 1 Check the power supply is plugged into an electrical outlet.
It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with
the device. The Power button on the front panel should be red, indicating the device is receiving the
power.
Step 2 Press the POWER button on the front panel.
The Power LED should turn blue. The unit will begin to start.
3.2 Activating Your Device
Purpose
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed
before activation. You can also activate the device via Web Browser, SADP or client software.
Step 1 Enter the same password in the text fields of
Create New Password and Confirm New
Password.
Step 2 In the IP Camera Activation text field, enter the
password to activate the IP camera (s)
connected to the device.
Step 3 Click OK to save the password and activate the
device.
STRONG PASSWORD RECOMMENDED–We highly
recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at
least three of the following categories: upper case letters,
lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we
recommend you reset your password regularly, especially
in the high security system, resetting the password
monthly or weekly can better protect your product.
Figure 3-1 Set Admin Password
Clear-text password is supported. Click and
you can see the clear text of the password.
Click the icon again and the content of the
password restores invisible (the same below).

HIKVISION DS-7332HQHI-K4 Specifications

General

Bit rate	64 Kbit/s
Product color	Black
Remote viewing	Yes
Maximum frame rate	30 fps
Audio formats supported	G.711 μ-law
Maximum video resolution	3840 x 2160 pixels
Video compression formats	H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels	16 channels
Audio input	5
BNC input ports	32
BNC output ports	1
Alarm input channels	16
Video input channels	32 channels
Alarm output channels	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of users	128 user(s)
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	Serial ATA
Maximum HDD capacity	10000 GB
AC input voltage	100 - 240 V
Power supply type	AC
Power consumption (max)	74 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	390 mm
Width	440 mm
Height	70 mm
Weight	7000 g