DS-7600 Series NVR User Manual
48
• Full Screen Monitoring Dwell Time: Set the time to dwell between switching of channels when events occur.
Setting Camera Order
Set the camera order to logically position cameras for more efficient monitoring of your own individual location.
Figure 54, Camera Order Settings Menu
1. Enter the View menu, shown in Figure 53 by going to Menu > System Configuration > Live View > View.
2. Select the Screen Configuration you would like to use in Live Feed by using the icons . The screen configuration
preview on the right will change depending on the option selected.
3. Click to select a screen in the right region and double-click to select a channel in the left region. The selected channel will be
displayed in the corresponding screen.
NOTE: means no channel will be displayed in this screen.
4. Click to start live view of all channels and click to stop live view all channels. Click or to go to the previous or
next page. For example, in 2 x 2 screen configuration mode, pressing the Next button will bring up the next set of four displays.
5. Click the Apply button to save the settings.
6. Click to exit out of the menu.
To Next Page
Loading...
