HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
52
Figure 59, Schedule Configuration Error Messages
6) Repeat the above steps to set recoding schedule for other days in the week.
• Edit the Schedule
Figure 60, Edit Schedule Menu
1) Click the Edit button on the bottom right to pop up the Edit Schedule menu, as shown in Figure 60.
2) Select a day from Monday to Sunday.
3) Set up time periods for schedule. If the All Day checkbox is checked, recording will occur over the entire day. To set up
multiple time periods, uncheck All Day and enter the Start/ End Time for the selected day. You can select recording type for
each period.
4) Click the Apply button to save the settings.
Figure 61, Copy Schedule to Other Days
5) Repeat the above steps to set record schedule for other days in this week. If the schedule can also be applied to other days,
click the Copy button to pop up a Copy to window, as shown in Figure 61.
6) Check the corresponding checkbox of the day to copy the record schedule to.
7) Click the OK button to save the settings and go back to the upper level menu or click the Cancel button to go back without
saving.