DS-7600 Series NVR User Manual
58
4. You may stop playback on any of the channels by unchecking the checkbox next to the channel.
5. You can also select recording in Full Screen mode by double click the date on the calendar.
NOTE: Up to 16-ch synchronous playback at 4CIF real time.
Playing Back Tags
Figure 68, Tag Playback Interface
1. Enter the Tag interface, shown in Figure 68 by going to Menu > Playback > Tag.
2. Select channel on the Channel drop-down list.
3. Select tag type for Tag Keyword or All.
4. If tag type was Keyword, Keyword area was editable to allow user to set keywords for fast searching.
5. Select start time and end time.
6. Select the pre-play and post-play time.
7. Click the Search button and the tag recording found will be listed in Result interface.
8. Click or double click the tag you want to play and it will be display in the Playback interface.
9. Drag the timeline to the place you want to play.
10. Click to enable or disable the audio.
11. Click to play back the pictures in Full Screen mode.
12. Click to edit the tag name.
13. Click to delete the tag.
To Next Page
Loading...
