HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
80
1. Enter the Trigger menu by going to Menu > Recording Configuration > Trigger.
Figure 104, Alarm Output Settings Menu
2. Select the Alarm Output tab, as shown in Figure 104, Alarm Output Settings Menu.
3. Select the Alarm Output No. in the drop-down list.
4. Edit the Alarm Name.
5. Select the Dwell Time.
6. Set up arming schedule for the alarm output by clicking the Set button. Choose one day in a week and set an arming schedule. If the
schedule can also be applied to other days, click Copy. Click Apply to save the settings and return to the Alarm Output interface.
7. If the same setting can also be applied to other alarm outputs, click Copy.
8. Click Apply to save the settings.
9. You can check the alarm output status in the Alarm Output Status list in the Alarm Output interface.
Configuring Exceptions
Actions can also be triggered when the NVR detects certain exceptions. To setup exception configuration:
1. Enter the Exception menu, shown in Figure 105, Exception Configuration Menu, by going to Menu > System Configuration >
Exception.