DS-7600 Series NVR User Manual
81
Figure 105, Exception Configuration Menu
2. Select the Exception Type to configure. The exception types include:
• HDD Full: If selected, trigger action when HDD is full.
• HDD Error: If selected, trigger action when errors on the HDD are detected.
• Network Disconnected: If selected, trigger action when a network disconnected is detected.
• IP Conflicted: If selected, trigger action if an IP conflicted is detected.
• Illegal Login: If selected, trigger action when illegal logins are detected.
• Recording exception: If selected, trigger action when recording exception is detected.
• All: if selected, trigger action when any one of exception above is detected.
3. Select the actions to take when the exception is detected. More than one action can be selected. The actions available include:
• Audible Warning: NVR will sound an audio warning if exception is detected.
• Notify Surveillance Center: NVR will notify surveillance center if exception is detected.
• Send E-mail: NVR will send an e-mail out to the designated recipients if exception is detected.
• Trigger Alarm Output: NVR will trigger alarm output if the connected camera supports alarm output. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
4. Click the Apply button to save the exception settings and click to return to the previous menu. Selecting without
clicking Apply will quit the menu without saving settings.
Configuring E-Mail Settings
If you would like to have the NVR send out e-mails when certain events are detected or exceptions have been triggered, you must first set
up the e-mail settings.
To setup e-mail settings:
1. Enter the E-mail Configuration menu by going to Menu > System Configuration > Network.
To Next Page
Loading...
