Password Strength Levels
Level 0 (Risky)
NVRs will not accept a Level 0
password
Password length is fewer than eight
characters, contains only one type of
character, is the same as the user name,
and/or is the mirror writing of the user name.
This type of password will not be accepted.
NVRs will accept a Level 1 password
Password contains two kinds of characters.
The combination is number + lowercase letter
or number + uppercase letter, and the
password length is at least eight characters.
This type of password will be accepted.
NVRs will accept a Level 2 password
Password contains two types of characters.
The combination is neither number +
lowercase letter nor number + uppercase
letter, and the password length is at least
eight characters. This type of password will
be accepted.
NVRs will accept a Level 3 password
Password contains more than three types of
characters, and the password length is at
least eight characters. This type of password
will be accepted.
NOTE: Types of characters are lowercase letters, uppercase letters,
numbers, and special characters. Only ASCII characters are
allowed.