Need help?Do you have a question about the HIKVISION DS-8600NI-I8 and is the answer not in the manual?
General| Model | DS-8600NI-I8 |
|---|---|
| Type | NVR |
| Category | Network Hardware |
| Audio Output | 1 channel |
| Two-Way Audio | Yes |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Hard Disk | 8 SATA interfaces |
| Capacity | Up to 10TB per HDD |
| Consumption | ≤ 30W (without HDD) |
| Max Resolution | 12MP |
| Video Output | HDMI, VGA |
| HDMI Output Resolution | 4K |
| VGA Output Resolution | 1920x1080 |
| Audio Input | 1 channel |
| Recording Resolution | 12 MP (4000x3000) |
| Network Interface | 1x 10/100/1000 Mbps Ethernet |
| USB Interface | 2x USB 2.0, 1x USB 3.0 |
| Alarm In/Out | 16/4 |
| Power Supply | 100-240V AC, 50/60 Hz |
| Working Temperature | -10°C to +55°C |
Procedures for starting, shutting down, and activating the NVR, including password setup.
Steps to activate IP cameras and add them to the NVR for connection and recording.
Procedure to set the parameters for PTZ control before operating the PTZ camera.
Setting up schedules for automatic recording and capture based on time and events.
Various methods for playing back recorded video files, including instant, normal, smart, and event searches.
Steps to initialize newly installed hard disk drives before they can be used by the NVR.
To Next Page