
Do you have a question about the HIKVISION DS-8616NI-K8 and is the answer not in the manual?
| Audio input | 2 |
|---|---|
| RS-232 interface | Yes |
| Alarm input channels | 16 |
| Video input channels | 16 channels |
| Alarm output channels | 4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| Internal SATA ports quantity | 8 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| AC input voltage | 100 - 240 V |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 200 W |
| Ethernet interface type | Gigabit Ethernet |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Input bandwidth | 160 Mbit/s |
| Supported resolutions | 3840 × 2160 1920 × 1080 1600 × 1200 1280 × 1024 1280 × 720 1024 × 768 |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| Maximum video resolution | 3840 x 2160 pixels |
| Video compression formats | H.264, H.265 |
| HDD capacity | - GB |
| HDD interface | SATA, eSATA |
| Maximum HDD capacity | 6000 GB |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | - |
| Certification | CE, FCC, CB, IC, RCM, KCC, ICE-003 |
| Product color | Black |
| Rack capacity | 2U |
| Depth | 470 mm |
|---|---|
| Width | 445 mm |
| Height | 90 mm |
| Weight | 8000 g |
Guides on powering up, shutting down, and activating the NVR by setting an admin password.
Details the setup wizard for initial NVR configuration, including network and RAID settings.
Provides instructions on activating and adding IP cameras to the NVR for monitoring.
Guides on defining parameters affecting image quality like stream type and resolution.
Guides on configuring general network parameters like IP address, gateway, and DNS.
Details the process of initializing newly installed HDDs before they can be used with the NVR.
Offers solutions for common issues encountered with the NVR, including display and connectivity problems.











