Do you have a question about the HIKVISION DS-8664NI-I8 and is the answer not in the manual?
Model | DS-8664NI-I8 |
---|---|
Channel Input | 64 |
Max Incoming Bandwidth | 320 Mbps |
Max Outgoing Bandwidth | 160 Mbps |
Video Compression | H.265+/H.265/H.264+/H.264 |
Two-Way Audio | Yes |
HDD Interface | SATA |
Number of HDDs | 8 |
Total HDD Capacity | 80 TB |
Alarm In/Out | 16/4 |
Operating Humidity | 10% to 90% |
Category | Network Video Recorder |
Video Output | HDMI, VGA |
HDMI Output Resolution | 4K (3840 × 2160) |
VGA Output Resolution | 1920 × 1080 / 60Hz |
Audio Input | 1 channel, RCA |
Audio Output | 1 channel, RCA |
Max HDD Capacity | 10 TB |
Recording Resolution | 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
Network Interface | 2 × 10/100/1000 Mbps |
USB Interface | 2 × USB 2.0 |
Power Supply | 100-240 VAC, 50/60 Hz |
Working Temperature | -10 °C to 55 °C |
Dimensions (Alternative) | 1U |
Form Factor | Rackmount (1U) |
Covers basic operations and functions available in the NVR's live view interface.
Guides on setting image quality, stream types, resolution, and video encoding parameters.
Explains how to set up schedules for automatic recording and capture based on time.
Details how to set up motion detection areas and trigger recording/capture actions.
Explains how to configure recording or capture based on external alarm inputs.
Guides on setting up recording triggered by Video Content Analysis (VCA) events like line crossing.
Covers methods to protect recorded files from overwriting, such as locking files.
Details various methods for searching and playing back recorded video files.
Explains how to export and back up recorded files to external storage devices.
Guides on configuring motion detection parameters and alarm response actions.
Explains how to handle external sensor alarms and configure their response actions.
Details setting up alarms for video loss and configuring response actions.
Covers configuring alarms for video tampering detection and response actions.
Describes various alarm response actions like event hints, full-screen monitoring, and email alerts.
Explains how to configure face detection rules, sensitivity, and alarm actions.
Guides on setting up vehicle detection rules, including license plate capture.
Details how to configure virtual lines for detecting crossing events and setting rules.
Explains how to set up intrusion detection rules within virtual regions for security monitoring.
Explains how to search for captured face images and play related video files.
Guides on searching for suspicious behavior based on VCA detection results.
Guides on setting basic network parameters like IP address, gateway, and DNS.
Covers advanced network configurations including Hik-Connect, DDNS, NTP, and SNMP.
Details how to test network delay, packet loss, and check network status.
Guides on setting up RAID arrays for data redundancy and storage management.
Guides on initializing new hard disk drives before they can be used with the NVR.
Explains how to add and manage network storage like NAS or IP SAN disks.
Offers solutions for common issues encountered during NVR operation.