Need help?Do you have a question about the HIKVISION DS-8632NI-I8 and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-8632NI-I8 |
| Category | Network Hardware |
| Language | English |
Details various alarm triggers and response actions.
Explains how to start up, shut down, and activate the NVR.
Provides step-by-step instructions for powering the NVR on and off.
Details the process of activating the device by setting an admin password.
Details how to reset the admin password using a GUID file.
Guides through the initial setup wizard for NVR configuration.
Guides on navigating and using the NVR setup wizard for initial settings.
Details network configuration parameters like IP address and DHCP.
Explains how to configure Hik-Connect for remote access.
Details how to initialize and manage HDDs.
Guides on searching and adding IP cameras to the NVR.
Covers activating and adding IP cameras using different methods.
Details the steps to activate IP cameras before adding them.
Explains methods to add detected online IP cameras.
Details various functions available in live view mode.
Details the procedure to set PTZ parameters before controlling the camera.
Guides on setting PTZ presets, patrols, and patterns.
Details how to set parameters affecting image quality and stream type.
Guides on setting up recording and capture schedules for cameras.
Explains how to set up motion detection parameters, area, and sensitivity.
Details how to configure recording and capture triggered by alarms.
Explains how to configure recording based on VCA (Video Content Analysis) events.
Covers locking recording files and setting HDD property to read-only.
Explains how to lock recording files during playback or export.
Guides on setting the HDD property to read-only for protection.
Details instant playback, normal search, and time-based playback.
Guides on playing back files by channel and time.
Explains how to search and play back video based on motion or line crossing events.
Details how to play back files based on event types like alarms or VCA.
Details quick export, backup by normal search, and event search.
Explains how to quickly export record files to backup devices.
Guides on backing up files using normal video or picture search.
Details backing up event-related record files.
Guides on setting up motion detection parameters, area, and sensitivity.
Details handling actions for external sensor alarms.
Explains how to detect and handle video loss alarms.
Guides on setting up video tampering detection and alarm response.
Covers handling system exceptions like HDD errors and network disconnection.
Details configuring actions like event hints, full screen monitoring, and email alerts.
Details how to configure face detection rules and sensitivity.
Explains how to set up vehicle detection, including license plate capture.
Guides on configuring rules for detecting objects crossing a virtual line.
Details how to set up intrusion detection rules and parameters.
Explains how to configure rules for detecting objects entering a virtual region.
Guides on searching captured face pictures and related video files.
Details searching for suspicious behavior based on VCA detection.
Explains how to search for captured vehicle plates and related information.
Guides on setting up general network parameters like IP address and DHCP.
Details advanced network settings like Hik-Connect, DDNS, NTP, SNMP, and ports.
Explains how to enable and configure Hik-Connect for remote access.
Guides on setting up Dynamic DNS for network access.
Details how to configure email notifications for alarms and events.
Explains port mapping via UPnP and manual mapping for remote access.
Details testing network delay, packet loss, and exporting network packets.
Guides on testing network delay and packet loss.
Details RAID purpose, supported types, and introduction to array creation.
Guides on enabling the RAID function.
Explains the one-touch process for creating disk arrays.
Details the manual process for creating RAID arrays.
Covers array status, automatic rebuilding, and manual rebuilding.
Guides on initializing newly installed HDDs before use.
To Next Page