EasyManuals Logo

HIKVISION DS-8616NI-K8 User Manual

HIKVISION DS-8616NI-K8
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
Network Video Recorder User Manual
239
14.7 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate check and
maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Step 1 Enter the HDD Information interface.
Menu > HDD>General
Step 2 Check the status of each HDD which is displayed on the list, as shown in Figure 14-25.
Figure 14-25 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or
Abnormal, please initialize the HDD before use. And if the HDD initialization is failed, please
replace it with a new one.
Checking HDD Status in HDD Information Interface
Step 3 Enter the System Information interface.
Menu >Maintenance > System Info
Step 4 Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure
14-26.

Table of Contents

Other manuals for HIKVISION DS-8616NI-K8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-8616NI-K8 and is the answer not in the manual?

HIKVISION DS-8616NI-K8 Specifications

General IconGeneral
Audio input2
RS-232 interfaceYes
Alarm input channels16
Video input channels16 channels
Alarm output channels4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Internal SATA ports quantity8
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
AC input voltage100 - 240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)200 W
Ethernet interface typeGigabit Ethernet
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Input bandwidth160 Mbit/s
Supported resolutions3840 × 2160 1920 × 1080 1600 × 1200 1280 × 1024 1280 × 720 1024 × 768
Audio formats supportedG.711 A-law, G.711 μ-law, G.726
Video formats supportedH.264, H.264+, H.265, H.265+, MPEG4
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.264, H.265
HDD capacity- GB
HDD interfaceSATA, eSATA
Maximum HDD capacity6000 GB
Maximum storage capacity8 TB
Number of HDDs installed-
CertificationCE, FCC, CB, IC, RCM, KCC, ICE-003
Product colorBlack
Rack capacity2U
Weight and Dimensions IconWeight and Dimensions
Depth470 mm
Width445 mm
Height90 mm
Weight8000 g

Related product manuals