Quick Start Guide of Network Video Recorder
37
2. Select the Shutdown button.
3. Click the Yes button.
Changing Default Admin Password
This product has default user name and password credentials for first time access. You must change these default
credentials to protect against unauthorized access to the product. You may change the password in the startup
wizard.
Steps:
1. Follow the wizard when the device starts and enter the change admin password interface.
2. Enter the default admin password (12345) for the first login and then edit the new password.
The default password (12345) for the Admin account is for first-time log-in purposes only. You
must change this default password to better protect against security risks, such as the unauthorized
access by others to the product that may prevent the product from functioning properly and/or lead
to other undesirable consequences.
If you do not change the default password, the following attention box will pop up to remind you. Click Yes
to set the new password.
For your privacy, we strongly recommend changing the password to something of your own
choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product.
3. Click Next to continue the wizard.
You can also change the Admin password through the Menu > Configuration > User interface. Please
refer to the User Manual for details.
To Next Page
Loading...
Need help?
General
