10
Install the MicroSD Card (Optional)
1. Remove the cover on the side of the doorbell with the
screwdriver.
2. Insert a microSD card (sold separately) into the slot until
there is a click.
3. Place the cover back on, and tighten the screws with the
screwdriver.
After installing the microSD card, you should initialize the card in
the Hik-Connect app before using it.
Initialize MicroSD Card
1. In the Hik-Connect app, tap the Storage Status in the
Device Settings interface to check the microSD card status.
2. If the card status displays as Uninitialized, tap to initialize
it.
3. The status will then change to Normal and it can store
videos.
To Next Page
Loading...
Need help?
General
