and non point-to-point operation as appropriate.
Users should also be advised that high-power radars are allocated as
primary users (i.e., priority users) of the bands 5250–5350 MHz and 5650–
5850 MHz and that these radars could cause interference and/or damage
to LE-LAN devices.
EU Conformity Statement: This product and, if applicable, the
supplied accessories too are marked with “CE” and comply
therefore with the applicable harmonized European standards
listed under the Radio Equipment Directive 2014/53/EU, the
EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE Directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose
of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (Battery
Directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European
Union. See the product documentation for specic battery
information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see:
www.recyclethis.info.
The power supply must conform
to LPS. The recommended adaptor
models and manufacturers are
shown on the right. Use the
attached adapter, and do not
change the adaptor randomly.
Model Manufacturer
MKAC-57-242500M,
MKAC-57-242200M,
MKAC-57-241500M
MACABLE
Safety Instruction
CAUTIONS: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. BATTERY IS NOT USER
REPLACEABLE.
Please read the manual before using the device.
Key Safety Tips for Transformer:
• Inspect your transformer thoroughly to prevent or minimize breakdowns. Before installation,
monitor your transformer by checking for any burnt odor, damaged power cord or
connectors, or any parts that are improperly installed.
• Keep the power off when working on the transformer. Make sure there is zero electrical
leakage or continuity between the current source and the system.
• Learn the maximum voltage requirements of your transformer. Be careful of system
overload from a single transformer, with the understanding that multiple transformers help
balance the impedance of each load.
• Keep spare nuts, bolts, and other objects away from your work, so that they don’t touch or
fall into the transformer.
• Be certain that your transformer is grounded, which will prevent static electricity and protect
the coils from contacting the enclosure or core.
• Always keep your transformer and all of its components dry and free from any kind of
moisture or water. To protect unskilled onlookers, set up caution signs that warn people to
keep away from danger.
Due to the product shape and dimensions, the name and address of the importer/
manufacturer are printed on the package.
Customer Service: For more information, please visit https://us.hikvision.com/en.
Need help? Please visit “https://us.hikvision.com/en” for our local contact details.
To Next Page
Loading...
Need help?
General
