HIKVISION DS-K1A802AMF-B

Generate Instant Report
It supports to generate the a series of aendance reports manually to view the employees'
aendance results.
Before You Start
Calculate the aendance data.
Note
You can calculate the aendance data manually, or set the schedule so that the client can calculate
the data automacally every day. For details, refer to Calculate Aendance Data .
Steps
1.
Enter the Time &
Aendance module.
2.
Click Aendance Stascs → Report .
3.
Select a report type.
4.
Select the department or person to view the
aendance report.
5.
Set the start me and end me during which the aendance data will be displayed in the report.
6.
Click Report to generate the
stascs report and open it.
Custom
Aendance Report
The client supports mulple report types and you can pre-dene the report content and it can
send the report
automacally to the email address you congured.
Steps
Note
Set the email parameters before you want to enable auto-sending email funcons. For details,
refer to Set Email Parameters in the user manual of the client soware.
1.
Enter the Time & Aendance module.
2.
Click
Aendance Stascs → Custom Report .
3.
Click Add to pre-dene a report.
4.
Set the report content.
Report Name
Enter a name for the report.
Report Type
Select one report type and this report will be generated.
Report Time
The
me to be selected may vary for dierent report type.
Person
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
102