HIKVISION DS-K1A802AMF-B

Move the cursor and select System → A. Status to enter the Aendance Status page.
Move the cursor and select Aendance Mode and set the aendance mode as Disable.
Figure 5-8 Disable Aendance Mode
The aendance status funcon is disabled, and you will not view or congure the aendance
status on the inial page.
5.7 Time and
Aendance Management
Manage department, shi, holiday, schedule, and report.
You can add, edit, delete department/shi/holiday/schedule. You can also export the aendance
report.
5.7.1 Manage Department (Edit/Search/Reset)
You can edit the department name, view the shi type and the shi name. You can also search the
department by department name, or reset department parameters.
Edit Department
Move the cursor to the Dept., and press OK to enter the department list.
Select a department from the list and select Edit, and press OK to enter the Edit Dept. page. You
can edit the department name, view the
shi type and the shi name.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
26