HIKVISION DS-K1A802AMF-B

Appendix C. Aendance Record Deleng Rule
Enable Record Delete
Set the percentage of the aendance record over threshold prompt.
1. When the record reaches the threshold, an alarm of the
aendance record over limit value will
be displayed on device screen. The alarm informaon is: Log will be full, export the report. Card
authencaon is available. The interface will be back to the alarm interface aer authencang
2. When the record is full, an alarm of the aendance record over limit value will be displayed on
the device screen. The alarm informaon is: Log is full, export the report. Card authencaon is
available. And the
rst 3000 aendance records will be deleted automacally. The interface will
be back to the alarm interface aer authencaon.
3. Deleng by me and deleng all are available when deleng the aendance records.
Disable Record Delete
Set the percentage of the aendance record over threshold prompt.
1. When the record reaches the threshold, an alarm of the aendance record over limit value will
be displayed on device screen. The alarm informaon is: Log will be full, export the report. Card
authencaon is available. The interface will be back to the alarm interface aer authencang.
2. When the record is full, an alarm of the aendance record over limit value will be displayed on
the device screen. The alarm
informaon is: Log is full, export the report. Card authencaon is
available. And there will be no new aendance records added. The interface will be back to the
alarm interface
aer authencang.
3. Deleng by me and deleng all are available when deleng the aendance records.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
120