HIKVISION DS-K1T320MFWX User Manual

In order to prevent the mobile phone from geng the data of the access control, you can
enable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card and authencang by presenng M1 card is available.
M1 Card Encrypon
Sector
M1 card encrypon can improve the security level of authencaon.
Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable CPU Card
Enable CPU card and authencang by presenng CPU card is available.
Set Card No. Authencaon Parameters
Set the card reading content when authencate via card on the device.
Go to Conguraon → Card Sengs → Card No. Authencaon Sengs .
Select a card authencaon mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
14.6.12 Set Privacy Parameters
Set the event storage type, picture upload and storage parameters, and the picture clearing
par
ameters.
Go to Conguraon → Security → Priv
acy Sengs
Event Storage Sengs
Select a method to delete the event. You can select from Delete Old Events Periodically, Delete
Old Events by Specied Time, or
Overwring.
Delete Old Events Periodically
Drag the block or enter number to set the period for event deleng. All events will be deleted
according to the congured me duraon.
Delete Old Events by Specied Time
DS-K1T320 Series Face
Recoginon Terminal User Manual
93

HIKVISION DS-K1T320MFWX Specifications

General

Operating system installed	Linux
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Display technology	LCD
Camera resolution (numeric)	2 MP
USB port	Yes
Ethernet LAN (RJ-45) ports	1
Face capacity	500
Housing color	Black
Cards capacity	1000 cards
Event capacity	100000
Languages support	Multi
Authentication modes	Multiple
Face recognition accuracy	99 %
Face recognition distance	0.3 - 1.5 m
Face recognition duration	0.2 s
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 90 %
Power consumption (typical)	6 W
Type	Face recognition terminal