HIKVISION DS-K1T320MFWX User Manual

Chapter 10 Time Sengs
Set Time and DST
Click Wizz
ard → Time Sengs .
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check S
ync. with Computer Time to synchronize the device me with the
computer's me.
Server Address Type/Server Address/NTP Port/Interval
Y
ou can set the server address type, server address, NTP port, and interval.
DST Sengs
Check DST to enable DST sengs.
Set the DST start me, end me and bias me.
Click Ne
xt to complete the sengs.
DS-K1T320 Series Face Recoginon Terminal User Manual
74

HIKVISION DS-K1T320MFWX Specifications

General

Operating system installed	Linux
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Display technology	LCD
Camera resolution (numeric)	2 MP
USB port	Yes
Ethernet LAN (RJ-45) ports	1
Face capacity	500
Housing color	Black
Cards capacity	1000 cards
Event capacity	100000
Languages support	Multi
Authentication modes	Multiple
Face recognition accuracy	99 %
Face recognition distance	0.3 - 1.5 m
Face recognition duration	0.2 s
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	0 - 90 %
Power consumption (typical)	6 W
Type	Face recognition terminal